This directory contains debugger modules for various platforms.
See installation instructions at
https://nusphere.com/kb/technicalfaq/howto_install_dbg_module.htm
The following table describes the supported server configurations and
locations of corresponding dbg modules. Please select the dbg module
applicable to your platform.
Operating System | Bitness and CPU | Requirements | Archive or Location | Directory inside | Comments |
Linux | x86, 32 | glibc >= 2.17 | dbg-12.0.16-Linux.tar.gz | x86 | |
Linux | x86, 64 | glibc >= 2.17 | dbg-12.0.16-Linux.tar.gz | x86_64 | 6 |
Linux | arm, 32 | glibc >= 2.13 | dbg-12.0.16-Linux.tar.gz | armv6 | 3 |
Linux | arm, 64 | glibc >= 2.28 | dbg-12.0.16-Linux.tar.gz | aarch64 | 8 |
Linux | x86, 32 | TS glibc >= 2.17 | dbg-12.0.16-Linux.tar.gz | x86_TS | |
Linux | x86, 64 | TS glibc >= 2.17 | dbg-12.0.16-Linux.tar.gz | x86_64_TS | 6 |
Linux | arm, 32 | TS glibc >= 2.13 | dbg-12.0.16-Linux.tar.gz | armv6_TS | 3 |
Linux | arm, 64 | TS glibc >= 2.28 | dbg-12.0.16-Linux.tar.gz | aarch64_TS | 8 |
|
Windows | x86, 32 | TS, VC9 | Windows\x86_VC9 | | 1, 4 |
Windows | x86, 32 | NTS, VC9 | Windows\x86_NTS_VC9 | | 2, 4 |
Windows | x86, 32 | TS, VC11 | Windows\x86_VC11 | | 1, 5 |
Windows | x86, 32 | NTS, VC11 | Windows\x86_NTS_VC11 | | 2, 5 |
Windows | x86, 32 | TS, VC14 | Windows\x86_VC14 | | 1, 9 |
Windows | x86, 32 | NTS, VC14 | Windows\x86_NTS_VC14 | | 2, 9 |
Windows | x86, 32 | TS, VC15 | Windows\x86_VC15 | | 1, 10 |
Windows | x86, 32 | NTS, VC15 | Windows\x86_NTS_VC15 | | 2, 10 |
Windows | x86, 32 | TS, VS16 | Windows\x86_VC15 | | 1, 11 |
Windows | x86, 32 | NTS, VS16 | Windows\x86_NTS_VC15 | | 2, 11 |
Windows | x86, 64 | TS, VC9 | Windows\x86_64_VC9 | | 1, 4 |
Windows | x86, 64 | NTS, VC9 | Windows\x86_64_NTS_VC9 | | 2, 4 |
Windows | x86, 64 | TS, VC11 | Windows\x86_64_VC11 | | 1, 5 |
Windows | x86, 64 | NTS, VC11 | Windows\x86_64_NTS_VC11 | | 2, 5 |
Windows | x86, 64 | TS, VC14 | Windows\x86_64_VC14 | | 1, 9 |
Windows | x86, 64 | NTS, VC14 | Windows\x86_64_NTS_VC14 | | 2, 9 |
Windows | x86, 64 | TS, VC15 | Windows\x86_64_VC15 | | 1, 10 |
Windows | x86, 64 | NTS, VC15 | Windows\x86_64_NTS_VC15 | | 2, 10 |
Windows | x86, 64 | TS, VS16 | Windows\x86_64_VC15 | | 1, 11 |
Windows | x86, 64 | NTS, VS16 | Windows\x86_64_NTS_VC15 | | 2, 11 |
|
FreeBSD | x86, 32 | v.13 or higher | dbg-12.0.16-FreeBSD.tar.gz | x86 | |
FreeBSD | x86, 64 | v.13 or higher | dbg-12.0.16-FreeBSD.tar.gz | x86_64 | 6 |
FreeBSD | x86, 32 | TS v.13 or higher | dbg-12.0.16-FreeBSD.tar.gz | x86_TS | |
FreeBSD | x86, 64 | TS v.13 or higher | dbg-12.0.16-FreeBSD.tar.gz | x86_64_TS | 6 |
|
Sun (solaris) | x86, 32 | v.11 or higher | dbg-12.0.16-SunOS.tar.gz | x86 | |
Sun (solaris) | x86, 64 | v.11 or higher | dbg-12.0.16-SunOS.tar.gz | x86_64 | 6 |
Sun (solaris) | x86, 32 | TS v.11 or higher | dbg-12.0.16-SunOS.tar.gz | x86_TS | |
Sun (solaris) | x86, 64 | TS v.11 or higher | dbg-12.0.16-SunOS.tar.gz | x86_64_TS | 6 |
|
NetBSD | x86, 32 | v.8 or higher | dbg-12.0.16-NetBSD.tar.gz | x86 | |
NetBSD | x86, 64 | v.8 or higher | dbg-12.0.16-NetBSD.tar.gz | x86_64 | 6 |
NetBSD | x86, 32 | TS v.8 or higher | dbg-12.0.16-NetBSD.tar.gz | x86_TS | |
NetBSD | x86, 64 | TS v.8 or higher | dbg-12.0.16-NetBSD.tar.gz | x86_64_TS | 6 |
|
OpenBSD | x86, 32 | v.7.2 or higher | dbg-12.0.16-OpenBSD.tar.gz | x86 | |
OpenBSD | x86, 64 | v.7.2 or higher | dbg-12.0.16-OpenBSD.tar.gz | x86_64 | 6 |
OpenBSD | x86, 32 | TS v.7.2 or higher | dbg-12.0.16-OpenBSD.tar.gz | x86_TS | |
OpenBSD | x86, 64 | TS v.7.2 or higher | dbg-12.0.16-OpenBSD.tar.gz | x86_64_TS | 6 |
|
Mac OSX | 32/64 | v.19.4 or higher | dbg-12.0.16-MacOSX.tar.gz | universal | 7 |
Mac OSX | 32/64 | TS v.19.4 or higher | dbg-12.0.16-MacOSX.tar.gz | universal TS | 7 |
COMMENTS:
- TS stands for php compiled with thread-safety turned on (see phpinfo output to make sure if you run php with this option)
- NTS stands for php compiled with thread-safety option turned off (see phpinfo output to make sure if you run php with this option)
- armv7-a-hf means support for all major 32bit ARM platforms starting with ARMv6 and higher: ARM11, CortexM0-CortexM4, CortexR4-CortexR7, Cortex-A5, -A7, -A8, -A9, -A12, -A15 etc
- VC9 means that php is compiled with MS Visual Studio 2008 runtime library (msvcr90.dll is in the dependencies)
- VC11 means that php is compiled with MS Visual Studio 2012 runtime library (msvcr110.dll is in the dependencies)
- In case of 64bit hardware, please make sure that installed php is also 64bit, otherwise you need 32bit debugger modules even though the hardware is 64bit.
- Universal binaries for Mac OSX platforms include x86 and x86 64 built-in modules
- aarch64 means support for all major 64bit ARM platforms (ARMv8+): -A53, -A57, -A72 etc
- VC14 means that php is compiled with MS Visual Studio 2015 runtime library
- VC15 means that php is compiled with MS Visual Studio 2017 runtime library
- VS16 means that php is compiled with MS Visual Studio 2019 runtime library
PhpED comes with pre-configured embedded web server only. If you need to
debug php scripts with Apache or IIS you have to install debugger module
manually. Alternatively, you may want to install TechPlatform product which
includes Apache, Perl, PHP and php Debugger.
See https://nusphere.com site for products and updates.
Modules for other platforms and/or php versions may be provided upon request.
See installation instructions here.
If you have any questions or encountered problems, do not hesitate to contact
us at https://shop/nusphere.com/contact_us/
|